Make a Cat5 / Ethernet / RJ45 / Network Cable 图教网线制作

CAT-5E/NETWORKCABLE Wiring Diagram & Crossover Cable Diagram

CAT-5E/网线接线图和交叉线图

The following CAT5 wiring diagram and crossover cable diagram will teach an installer how to correctly assemble a CAT-5 cable RJ45 connectors for regular network cables as well as crossover cables. The first set of instructions are for standard network patch cables (EIA/TIA-568B). 

以下CAT5布线图和交叉线图，安装程序会教如何正确组装的CAT-5电缆的RJ45连接器，用于常规的网络电缆和交叉电缆。第一组的指令为标准的网络的补丁电缆（EIA/TIA-568B）。

• Using an cat5 cutter and crimping tool, strip about 1/3"of the out jacket of the cat-5 cable.  Be sure not to strip or damage any of the pairs of inner cables.  使用CAT5刀和压接工具，带出的CAT-5电缆外套的约1/3“。确保不剥夺或损害任何对内部电缆。

• Assemble the pairs of wires in the following order for network cables (EIA standard / EIA-568 B).   组装线对按以下顺序网线（EIA标准/ EIA-568 B）。

• Insert the wires into the RJ45 jack as seen below.  Be sure to keep the wires in the correct order.   如下图所示，将导线插入RJ45插孔。以正确的顺序是一定要保持的电线。

• Insert the RJ45 connector into the crimping tool (again carefully make sure the wires stay inserted in the correct order). Crimp down firmly on the crimping tool to permanently attach the RJ45 to the CAT5 cable.   插入RJ45连接器压接工具（再仔细，确保以正确的顺序保持插入的电线）。用力向下压接工具压接永久连接的RJ45 CAT5电缆。

Crossover Cable Diagram

To create a crossover cable with cat-5 cable follow the same instructions as above for CAT-5 wiring except when you get to step #2, use the below crossover cable diagram:

要创建一个跨接电缆CAT-5电缆CAT-5布线除上述相同的指令，当你得到第2步，使用下面的交叉网线图：